DJI SDR Transmission 2 Gimbal Control Cable LEMO

DJI SDR Transmission 2 Gimbal Control Cable USB-C to 4-pin

The DJI SDR Transmission 2 Gimbal Control Cable (USB-C to 4-pin) is the connecting cable between the SDR Transmission 2 transceiver and the Ronin 2 or Master Wheels. The 4-pin connector is a round locking connector that clicks firmly into the port, so the connection stays secure even on a moving car or during intensive use.

When you connect the cable to the Ronin 2, you can control the gimbal wirelessly through the DJI Ronin app: gimbal control, recentering the gimbal and starting or stopping a recording on the camera, provided the stabilizer is already connected to a camera. If you use Master Wheels, you control the Ronin 2 or a compatible RS stabilizer on the transceiver (TX) with it, and you can likewise start and stop the recording on the camera. In both cases the transceiver is powered via the gimbal, so you do not need a separate battery or USB power supply.

Good to know: for remote camera control you also need a Multi-Camera Control Cable between the stabilizer and the camera in addition to this cable. If you use the transceiver via the quick-release plate on the stabilizer, a native vertical setup is not possible. If you work with an RS 4 Pro, RS 4 or RS 3 Pro, you need the USB-C to CAN version instead of this cable.